Legion 42
Welcome to Legion 42 (L42). L42 is a subsidiary to JR1942 and its original creator who focused on resurrecting forgotten icons and forging new ones. At L42 we focus on the same things, but on a galaxy far, far, away...and help to enhance your Star Wars and Death Trooper needs. Right now our inventory is limited, but expect it to grow as new needs are realized. Our primary focus is to have a consolidated site to help other Death Trooper build their costumes, so give us a shout if you need some help.
Decals
Imperial Helmet Symbol
Size: 2.5" $4.00 |
Mandalorian Symbol
Size: 2.5" $4.00 |
Mythosaur Symbol
Size: 2.5" $4.00 |
Mud Horn Symbol
Size: 2.5" $4.00 |
SE-14R Decal (Check Your Size!)
Size: 2"x.7" $4.00 |
SE-14R Decal (Check Your Size!)
Size: 1.75"x.6" $4.00 |
Rebel Helmet Symbol
Size: 2.5" $4.00 |
Jedi Symbol
Size: 2.5" $4.00 |
ID Cards (Edge-Lit Series)
Death Trooper ID Card
Size: 4.25"x2.75" $25.00 OUT OF STOCK
|
The TX-1942 ID CardThe Death Trooper ID Card is a fan favorite! Our designers focused on Star Wars cannon sketches to create a one-of-a-kind ID card etched onto 4mm clear acrylic and back-lit with x1 3mm green LED and powered by x1 2032 battery for hrs of fun and ID checking, and small enough to fit into any pouch or pocket! The back magnet is secured in-place and the top magnet is removable to replace the LED or battery.
Note: The LED prongs are polarity sensitive. The longer prong is the positive (+)...if you're not sure just flip LED and place the battery in-between the prongs until it works. Battery life is dependent on use, and the magnets will not drain the battery. |
LED Replacement Diode
Size: 3mm $2.00 |
3mm LED Replacement3mm LED bulbs come in many colors, and we wanted our first ID card to be clear, so you could easily replace the bulb and also use other colors depending on your preference. If you are not familiar with LED diodes, the bulbs will always look or appear clear until a power source is applied and then the diode will emit the color, so don't be dismayed when you receive an LED diode from us and it's clear. The LED bulbs listed here will fit exactly into our LED laser cut-out for our edge-lit ID cards. Move along, move along...
|
Accessories
Reinforcement Acrylic Buckle & Chicago Screws
$10.00 |
This buckle kit is designed to make your DT Belt making experience a little easier. This black acrylic is laser cut and fits most buckles (some trimming may be required depending on your print). The female ends of the Chicago Screws will need to be recessed (drilled) and flush mounted on the back of the buckle, glued in place w/E-6000, and 2mm acrylic cover glued on back/top-of for a secure fit and removable buckle. If you need further instruction please see our build instructions here: Belt Build
|
Buckshot 2.0
Size: 3.70"x1.60" $40.00 |
The Buckshot 2.0 is small, portable, Bluetooth capable, waterproof & shockproof. There isn't much we don't like about this tiny speaker and it boasts a 20-hr battery life. It's black and rugged housing fits in perfect with the Death Trooper and compact size make it easy to mount or place anywhere on your armor or pouch. The only complaint we have on this device is the decibel level at this price. For that reason we like the MUVEACOUSTIC which is half the price and twice the sound, but its not weather or shock proof...
|
MUVEACOUSTICS
Size: 3.20"x3.20" $22.00 |
MUVEACOUSTICS is a great addition to your Star Wars costume. This speaker is Bluetooth ready, easy to pair,lasts 7-hrs fully charged, fits into ammo pouches or light weight enough to Velcro to armor and extremely loud for its compact size. Did we mention the price? Cheap enough that if you damage it or lose it you won't have a huge issue replacing it with another one. You can also pair two of these chestnuts for more audio...
|
Cards (Darkside)
Size: Standard $13.50 |
Cards (Lightside)
Size: Standard $13.50 |
Cards (Sabacc)
Size: Standard $40.00 |
1/12 Scale Bandai Death Trooper
Note: Ships from Japan (7") $30.50 |
|
|
Didn't find what you wanted? It happens...let us try to make it for you. Our graphic engineer is on-hand to custom make, edit, or apply an existing design you have and apply it to durable vinyl with a UV laminate layer that will endure wear and weather and even the dishwasher, or custom make your garrison your own laser-cut/etched acrylic ID cards.
So, use the form on the left to reach out to us, and let us know what you have in mind or send us an image you want and we will work with you to custom make your own sticker and list it here. Design fees, laser costs, and all that shenanigans is FREE. |
Custom Decals $4.00
|